Catalogue-On line - By Pages |
Request For a copy of catalogue in Book format and Samples (Please fill in detail data and write your request in the Cell 'comment') |
| Prefix |
| Cover | Cover | |
| Photos Of Production Process | P1 |
| Oil Seal |
| Introduction | P2 | |
| Material of Oil Seals |
| Spring Material | P2 |
| Metal Rings Material | P2 |
| Rubber Material Performance | P3 |
| Oil Seal Standard Tolerances |
| JIS B2402 | P4 |
| DIN 3760 | P4 |
| Oil Seal Nomenclature -- Technical phrases of oil seals |
| Illustration with drawings | P5 |
| R.W.V. (Redial Wall Variation) | P6 |
| Dynamic Runout (Shaft Runout) | P6 | |
| Shaft to Bore Missalignment (STBM) | P6 |
| Oil Seal Types |
| General Purpose Type |
| A-Series: Metal ground O.D. with inner case for greater structural rigidity | P7 |
| B-Series: Metal case with ground O.D. generally most economical. | P7 |
| C-Series: Rubber O.D. for some aluminum and magnesium housings | P8 |
| F-Series: Completely rubber encased for corrosive condition | P8 |
| G-Series: Corrugated rubber O.D. for large thermal expansion housing | P8 |
| M-Series: Metal O.D. with rubber covered completely inside | P8 |
| Z-Series: Metal O.D. with rubber covered completely inside and top surface | P8 |
| Special Purpose Type |
| D-Series: Dual lip type | P9 | |
| P-Series: Anti-pressure lip type | P9 | |
| J-Flange case type | P9 | |
| Side lip type | P10 | |
| Multiple or inwardly bent lip type | P10 | |
| W-Series: Wiper or scraper seal type | P10 | |
| O-Series: External lip type | P11 | |
| PB-Series: PFTE lip type | P11 | |
| Mud sealing lip type | P11 |
| E-Series: High dynamic eccentricity type | P12 | |
| Felt lip type | P12 | |
| Leather lip type | P12 | |
| Q-Series: No metal insert or split type | P12 |
| Hydrodynamic seal | P13 | |
| V-Seal: Axial shaft seal | P13 | |
| Change types from general purpose type | P13 |
| Operation Limits |
| Operation pressure limits for S/T types | P14 | |
| Operation speed limits for S/T/O types | P14 |
| Operation speed limits for V/K types | P14 |
| Hydraulic Sealing System |
| Piston Application | P15 | |
| Rod Application | P15 | |
| Rod Wiper | P16 |
| Various Sealing Products | P16 |
| PHLE O-RINGS |
| Introduction | P17 | |
| Hardness | P17 | |
| How to choose an o-ring for dynamic parts | P17 | |
| The application of Back-up rings | P17 |
| Resistance prosperities of various elastomers | P18 |